When you buy a belt it is important to take an accurate measurement from an existing belt that fits well. You cannot assume a belt will fit by ordering the same size as your trouser waist size. A belt can require an additional 1 or 2 inches to allow for clothing underneath.
To measure an existing belt, lay it on a flat surface and measure from where the buckle attaches the belt to the hole on the belt that you normally use.
Our stretch belts stretch approximately 1" - 2" and your normal waist size should be ordered.
Belt sizes are measured from where the buckle is attached to the belt to the first and last holes. For example if a belt is sized at 32" - 36", this means the first hole will be 32" from the buckle attachment and the last hole at 36". You should order a belt approximately 2” more than your trouser size.